Trigger wheel 100mm / 57mm (60-2)
Universal
Reviews
Help others choose right. Be the first to write a review!
Write a reviewTrigger wheel 100mm / 57mm (60-2)
Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems.
Used in conjunction with a Hall or VR sensor connected to the ECU. Mounting of the trigger wheel must be done on the crankshaft pulley / adapter.
The sensor is then mounted at a distance of approx. 0.5-1 mm towards the trigger wheel. The sensor should also be centered on the trigger wheel. If the gvar is mounted too far away or if the trigger wheel throws, the signal to the ECU will be worse.
Dimensions:
Outer diameter: 100mm
Inner diameter 57mm
Thickness: 3mm
Teeth: 60-2
See picture for placement of sensors.
----------------
Guides & Info
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Tools
Suitable sensor
