Volvo 8v camshaft
Universal
Reviews
Help others choose right. Be the first to write a review!
Write a reviewVolvo 8v camshaft
Duration on camdrive: 300 degrees
Cam lift: 12.9mm
Cam angle: 108 degrees
TDC lift approx: 4.5mm
Valve clearance: 0.35mm
Camshaft benefit groove: Yes
Need Laschcaps: Yes, 4mm is recommended
Fits original valve tappets: Yes
TDC lift is indicated by valve clearance and is set as follows:
Set the engine with the piston in the top position (exhaust is closing and intake is opening).
The intake valve must then open the specified value.
The value can be adjusted slightly during test driving for best results.
Adjustable cam drive facilitates optimization of this.
Adjust valve clearance
Tip: Be careful not to break the camshaft during assembly/disassembly, then the axial bearing at the rear edge may break, applies to all sharper camshafts
----------------
Guides & Info
| Bilmärke | Volvo |
| Engine code | B230 |
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
